LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Wheel Alignment Specifications & Adjustment Procedures) >> Wheel Alignment Procedures >> Camber & Caster Adjustment >> 1999 Sierra & Silverado C1500 & C2500 (Camber Adjustment)

1999 Sierra & Silverado C1500 & C2500 (Camber Adjustment)

WARNING: This page does not describe the selected car, but rather 64 other vehicles, including the 1999 Pontiac Montana, 1999 Oldsmobile Silhouette, 1999 Oldsmobile Bravada, 1999 GMC Yukon, and 1999 GMC Suburban. However, it is still accessible from the selected car via links, so may be relevant.

If camber is not within specification, remove and discard pinned adjusting cam inserts. Loosen upper control arm adjusting cam nuts. Rotate cambolts until camber is within specification. See WHEEL ALIGNMENT SPECIFICATIONS  table. Tighten nuts to specification. See TORQUE SPECIFICATIONS  table. See Figure .

scientia non olet · About LEMON Manuals