Oil Pressure Test Plug: Installation
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, 2004 Chevrolet Cab & Chassis Silverado, and 2003 GMC Sierra. However, it is still accessible from the selected car via links, so may be relevant.
Install a new "O" ring (1) on the pressure tap plug (2). See Figure . Install the plug and "O" ring into the converter housing. Tighten the plug to specification. See TORQUE SPECIFICATIONS .