Manual Detent Spring & Roller: Installation
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, 2004 Chevrolet Cab & Chassis Silverado, and 2003 GMC Sierra. However, it is still accessible from the selected car via links, so may be relevant.
Install the detent spring assembly (2) onto the control valve assembly. Confirm the roller of the detent spring assembly rests on the detent lever (1). See Figure . Install 2 detent spring bolts (3). Tighten the bolts to specification. See TORQUE SPECIFICATIONS . Install the oil pan and suction filter. See INTERNAL FILTER under LUBRICATION.