LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 286 (Automatic Transmission Servicing - ALLISON LCT 1000) >> Removal & Installation >> Heat Shield >> Removal

Heat Shield: Removal

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, 2004 Chevrolet Cab & Chassis Silverado, and 2003 GMC Sierra. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and suitably support the vehicle.
  2. Remove the bolts (2) from the front heat shield (1). See Fig 1 .
  3. Remove the front heat shield (1) from the transmission.
  4. Remove the bolt (4) and the nut (5) from the side heat shield (3).
  5. Remove the side heat shield (3) from the transmission.
Fig 1: Removing & Installing Heat Shields
G00096139Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals