LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 286 (Automatic Transmission Servicing - ALLISON LCT 1000) >> Removal & Installation >> Auxiliary Oil Cooler >> Removal

Auxiliary Oil Cooler: Removal

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, 2004 Chevrolet Cab & Chassis Silverado, and 2003 GMC Sierra. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front grill assembly.
  2. Place a drain pan under the vehicle.
  3. Disconnect the transmission oil cooler lines from the auxiliary cooler. See AUXILIARY OIL COOLER HOSE/PIPES & FITTINGS  .
  4. Remove the auxiliary oil cooler bolts (1) and push pins (2). See Fig 1 .
  5. Remove the auxiliary oil cooler from the vehicle.
Fig 1: Removing & Installing Auxiliary Oil Cooler
G00096140Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals