LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 286 (Automatic Transmission Servicing - ALLISON LCT 1000) >> Removal & Installation >> Auxiliary Oil Cooler >> Installation

Auxiliary Oil Cooler: Installation

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, 2004 Chevrolet Cab & Chassis Silverado, and 2003 GMC Sierra. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the auxiliary oil cooler to the vehicle.
  2. Install the bolts (1) and the push pins (2) that retain the auxiliary oil cooler to the radiator brace. See Figure . Tighten the bolts to specification. See TORQUE SPECIFICATIONS  .
  3. Connect the transmission oil cooler lines to the auxiliary cooler. See AUXILIARY OIL COOLER HOSE/PIPES & FITTINGS  .
  4. Install the front grill assembly.
  5. Fill transmission with appropriate fluid to proper level. See LUBRICATION  .
scientia non olet · About LEMON Manuals