LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 28 (Computer Relearn Procedures) >> Relearn Procedures (Trucks & Vans) >> Blazer, BRAVADA, Envoy, Jimmy, Pickup & SONOMA >> BCM Programming

BCM Programming

WARNING: This page does not describe the selected car, but rather 67 other vehicles, including the 2000 Saturn SW2, 2000 Saturn SL2, 2000 Saturn SL1, 2000 Saturn SL, and 2000 Saturn SC2. However, it is still accessible from the selected car via links, so may be relevant.

This procedure requires Techline terminal and equipment. Ensure battery is fully charged. Ensure battery and lighter connectors are secure. Ensure DLC is accessible. Turn ignition on. Refer to Techline terminal and equipment user's instructions.

If BCM fails to program, check all BCM connections, check Techline terminal and equipment for latest software version. Retry programming. If BCM fails to program again, replace BCM. See BODY CONTROL MODULES - BLAZER, BRAVADA, ENVOY, JIMMY, SONOMA & S10 PICKUP article in ACCESSORIES & EQUIPMENT. Clear DTCs after programming.

scientia non olet · About LEMON Manuals