LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 275 (Automatic Transmission - 4L60-E/4L65-E - Servicing) >> Removal & Installation >> Oil Cooler Lines >> Removal

Oil Cooler Lines: Removal

WARNING: This page does not describe the selected car, but rather 20 other vehicles, including the 2004 GMC Yukon XL, 2004 GMC Yukon, 2004 GMC Sierra, 2004 Chevrolet Tahoe, and 2004 Chevrolet Suburban. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front grill assembly.
  2. Remove the transmission fluid cooler hose from the auxiliary oil cooler. See Fig 1 . See OIL COOLER LINE QUICK CONNECT FITTING  .
  3. Remove the transmission fluid cooler hose from the radiator. See OIL COOLER LINE QUICK CONNECT FITTING  .
  4. Raise the vehicle.
  5. Remove the engine protection shield.
  6. Remove the cooling lines from the transmission. See Figure . See OIL COOLER LINE QUICK CONNECT FITTING  .
  7. Remove the oil cooling lines from the vehicle.
Fig 1: Disconnecting Connecting Fittings At Auxiliary Cooler
G00096142Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals