LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 275 (Automatic Transmission - 4L60-E/4L65-E - Servicing) >> Removal & Installation >> Filler Tube & Seal >> Removal

Filler Tube & Seal: Removal

WARNING: This page does not describe the selected car, but rather 20 other vehicles, including the 2004 GMC Yukon XL, 2004 GMC Yukon, 2004 GMC Sierra, 2004 Chevrolet Tahoe, and 2004 Chevrolet Suburban. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the transmission oil level indicator.
  2. Raise and suitably support the vehicle.
  3. Support the transmission using a suitable jack.
  4. Remove the transmission mount nut. See Fig 1 .
  5. Remove the transmission crossmember bolts/nuts. See Fig 2 .
  6. Remove the transmission crossmember.
  7. Loosen the left exhaust pipe nuts. See Fig 3 .
  8. Loosen the right exhaust pipe nuts. See Fig 4 .
  9. Remove the insulator nuts and insulator from the bracket. See Fig 5 .
  10. Remove the exhaust pipe hanger bracket bolts and bracket.
  11. Lower the transmission slightly.
  12. Disconnect the transmission oil cooler lines. See Fig 6 .
  13. Plug the transmission oil cooler line fittings.
  14. Remove the indicator tube nut. See Fig 7 .
  15. Remove the oil level indicator tube. See Fig 8 .
  16. Remove the seal from the transmission, if necessary.
Fig 1: Removing/Installing Transmission Mount Nut
G00202976Courtesy of GENERAL MOTORS CORP.
Fig 2: Removing Transmission Crossmember
G00202977Courtesy of GENERAL MOTORS CORP.
Fig 3: Removing Left Exhaust Pipe
G00202978Courtesy of GENERAL MOTORS CORP.
Fig 4: Removing Right Exhaust Pipe
G00202979Courtesy of GENERAL MOTORS CORP.
Fig 5: Removing Insulator
G00202980Courtesy of GENERAL MOTORS CORP.
Fig 6: Disconnecting Transmission Oil Cooler Lines
G00202981Courtesy of GENERAL MOTORS CORP.
Fig 7: Removing Indicator Tube Nut
G00202982Courtesy of GENERAL MOTORS CORP.
Fig 8: Removing & Installing Filler Tube
G00096144Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals