Shift Cable
WARNING: This page does not describe the selected car, but rather 20 other vehicles, including the 2004 GMC Yukon XL, 2004 GMC Yukon, 2004 GMC Sierra, 2004 Chevrolet Tahoe, and 2004 Chevrolet Suburban. However, it is still accessible from the selected car via links, so may be relevant.
- Ensure the steering column shift lever and the transmission manual shaft lever are in the Park (P) position.
- Raise and suitably support the vehicle.
- With right hand, push the flange (3) of the cable (transmission end) (5), inside the cable (1) (shifter end) until the connection is made, ensuring the flange ribs (7) align with the cable (shifter end) (1) slots (2). See Fig 1 .
- Hold the red security ring (6) with left hand and with right hand, twist the blue rotating lock (4) until it snaps into position.
- With left hand, push the red security ring (1) to the right. See Fig 2 .
- The red security ring should cover the white (2) marks on the blue rotating lock (3).