LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 273 (Automatic Transmission Servicing) >> Removal & Installation >> Wiring Harness >> Installation

Wiring Harness: Installation

WARNING: This page is about a different car, the 2003 Pontiac Aztek and 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.

Connect the wiring harness. See Figure . Install the wiring harness to the solenoid valve(s), TFP manual valve position switch and/or the temperature sensor. Install the case side cover. See CASE SIDE COVER  .

scientia non olet · About LEMON Manuals