TFP Manual Valve Position Switch: Installation
WARNING: This page is about a different car, the 2003 Pontiac Aztek and 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
- Carefully install the fluid pressure manual valve position switch. Handle the switch carefully, the fluid pressure manual valve position switch is very delicate. See Figure .
- Install the control valve body bolts (375, 379 and 381) that mount the fluid pressure manual valve position switch to the control valve body (300). Tighten the control valve body bolts (375, 379 and 381) to specification. See TORQUE SPECIFICATIONS .
- Connect the transaxle wiring harness. Install the case side cover. See CASE SIDE COVER .