Oil Pump: Removal

WARNING: This page is about a different car, the 2003 Pontiac Aztek and 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: DO NOT remove the 3 bolts which hold the pump together.

Remove the case side cover. See CASE SIDE COVER . Remove the oil pump bolts (205, 206 and 207). See Fig 1 . Remove the oil pump from the valve body. See Fig 2 . Clean and inspect the oil pump. See appropriate OVERHAUL article.

Fig 1: Identifying Oil Pump Bolts

Courtesy of GENERAL MOTORS CORP.

Fig 2: Removing & Installing Oil Pump Assembly

Courtesy of GENERAL MOTORS CORP.