LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 269 (Door System, Mirror System & Window System) >> Repair Instructions >> Reveal Molding Replacement - Front Door Window >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Buick Regal and 2002 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the outside mirror from door. Refer to Mirror Replacement - Power .
  2. Loosen the reveal molding at the top of the window.
  3. Pull the front door reveal molding from the door using a small flat-bladed tool to release the retaining clips while pulling.
  4. Remove the reveal molding from the door.
    Fig 1: Identifying Front Door Window Reveal Molding
    G01755909Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals