Circuit Description
WARNING: This page is about a different car, the 2002 Buick Regal and 2002 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
The IPC monitors the ignition 0 voltage circuit, the ignition 1 voltage circuit, and the crank voltage circuit. The ignition 0 voltage circuit is active (circuit is high) when the ignition switch is in accessory, on, or start. The ignition 1 circuit is active (circuit is high) when the ignition switch is in on or start. The crank voltage circuit is active (circuit is high) when the ignition switch is in start.