LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 262 (Drive Axles - Full Floating Axle) >> Removal & Installation >> Rear Axle Housing Assembly >> Installation

Rear Axle Housing Assembly: Installation

WARNING: This page does not describe the selected car, but rather 17 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 GMC Sierra, 2002 GMC Savana Special, and 2002 GMC Savana Camper Special. However, it is still accessible from the selected car via links, so may be relevant.

Raise rear axle assembly. Align spring saddle holes with leaf spring center bolts. Install "U" bolts and nuts and tighten bolts to specification. To complete installation, reverse removal procedure. Add lubricant. See LUBRICATION  . Bleed brake system. See appropriate article in BRAKES. See TORQUE SPECIFICATIONS  .

scientia non olet · About LEMON Manuals