LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 262 (Drive Axles - Full Floating Axle) >> Removal & Installation >> Axle Shafts >> Installation

Axle Shafts: Installation

WARNING: This page does not describe the selected car, but rather 17 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 GMC Sierra, 2002 GMC Savana Special, and 2002 GMC Savana Camper Special. However, it is still accessible from the selected car via links, so may be relevant.

Clean axle shaft flange and hub assembly. Install NEW gasket. Install axle shaft into axle tube. Install and tighten axle flange bolts to specification. See TORQUE SPECIFICATIONS  . Install wheel and tighten lug nuts to specification. Add lubricant. See LUBRICATION  .

Fig 1: Exploded View Of Axle & Hub Assembly
G91I13316Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals