LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 26 (HVAC Systems - Automatic) >> Diagnostic Information and Procedures >> DTC B0446: HVAC Control Module Receives A Right Air Temperature Actuator Position Signal From The Right Air Temperature Actuator >> Diagnostic Aids

Diagnostic Aids

WARNING: This page is about a different car, the 2002 Buick Regal and 2002 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.

Install a scan tool to the diagnostic link connector. Turn the ignition switch to the ON position. Select the OUTPUT CONTROL screen in HVAC special functions. Use the MISCELLANEOUS TEST screen to manually drive the right air temperature actuator with the scan tool from fully open to fully closed. Monitor the RH MIX MTR POSITION FEEDBACK with the scan tool when this is done. A normal position feedback signal should range between 0-255 counts as the electric actuator is being moved.

If condition not present refer to TESTING FOR INTERMITTENT AND POOR CONNECTIONS

scientia non olet · About LEMON Manuals