LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 258 (Engine Controls Self-Diagnostics - 2.2L) >> Diagnostic Tests >> DTC P0325: Knock Sensor Circuit >> Circuit Description

Circuit Description

WARNING: This page is about a different car, the 2003 GMC Sonoma and 2003 Chevrolet S10 Pickup. However, it is still accessible from the selected car via links, so may be relevant.

The Knock Sensor (KS) produces an AC voltage at all engine speeds and loads. The Powertrain Control Module (PCM) then adjusts the spark timing based on the amplitude and frequency of the KS signal. The PCM uses the KS signal to calculate the average voltage. Then the PCM assigns a voltage value. The PCM checks the KS and related wiring by comparing the actual knock signal to the assigned voltage range. A normal KS signal should stay outside the assigned voltage range. This Diagnostic Trouble Code (DTC) will set if the KS signal is within the assigned voltage range or not present or if the PCM malfunctions in a manner that will not allow proper diagnosis of the KS system.

scientia non olet · About LEMON Manuals