LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 257 (Engine Mechanical - 4.0L (On-Vehicle)) >> Repair Instructions >> Engine Mount Bracket Replacement - Front >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front engine mount. Refer to Engine Mount Replacement - Right .
  2. Remove the two upper bolts securing the front engine mount bracket to the cylinder head.
  3. Remove the two nuts securing the front engine mount bracket to the engine block.
  4. Remove the bolt securing the brace to the transaxle.
  5. Remove the transaxle support brace.
  6. Remove the front engine mount bracket.
    Fig 1: Removing Engine Mount Bracket
    G01819217Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals