LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 257 (Engine Mechanical - 4.0L (On-Vehicle)) >> Repair Instructions >> Engine Lift Bracket Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle.
  2. Remove the bolt (2) securing the rear transaxle brace (1) to the transaxle.
  3. Lower the vehicle.
  4. Remove the nuts (3) securing the rear transaxle brace (1) to the cylinder head.
    Fig 1: Removing Rear Transaxle Brace
    G01819223Courtesy of GENERAL MOTORS CORP.
  5. Remove the engine lift bracket retaining bolts.
  6. Remove the engine lift bracket.
    Fig 2: Removing Engine Lift Bracket
    G01819224Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals