LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 252 (Engine Controls - Removal & Installation) >> Sensors >> Mass Airflow Sensor >> Installation

Mass Airflow Sensor: Installation

WARNING: This page is about a different car, the 2003 Pontiac Grand Am and 2003 Oldsmobile Alero. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the MAF sensor to the air filter housing.
  2. Install the air inlet duct to the MAF sensor and the throttle body. Tighten the air cleaner duct clamps to specification. See TORQUE SPECIFICATIONS  .
  3. Connect the IAT sensor harness connector.
  4. Connect the MAF sensor harness connector.
  5. Start the engine.
  6. Check the air intake duct for leaks.
scientia non olet · About LEMON Manuals