LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 252 (Engine Controls - Removal & Installation) >> Motors & Solenoids >> EVAP Canister Vent Solenoid >> Installation

EVAP Canister Vent Solenoid: Installation

WARNING: This page is about a different car, the 2003 Pontiac Grand Am and 2003 Oldsmobile Alero. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the EVAP canister vent valve harness connector.
  2. Install the clip into the EVAP canister vent valve harness connector. See Figure .
  3. Install the EVAP canister vent valve by pushing the mounts into the original holes.
  4. Lubricate the hose end with lubricant.
  5. Install the hose to the EVAP canister vent valve. See Figure .
  6. Disconnect the EVAP canister vent valve harness connector.
  7. Lower the vehicle.
scientia non olet · About LEMON Manuals