LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 252 (Engine Controls - Removal & Installation) >> Ignition Systems >> Spark Plugs >> Installation (2.2L)

Installation (2.2L)

WARNING: This page is about a different car, the 2003 Pontiac Grand Am and 2003 Oldsmobile Alero. However, it is still accessible from the selected car via links, so may be relevant.
  1. Gap the spark plug, using round wire type spark plug gap gauge. Adjust the spark plug gap to 0.045" (1.14 mm).
    2. CAUTION: DO NOT coat the spark plugs with anti seize compound. Over torquing could occur and damage to the cylinder head threads may result.
  2. Install the spark plugs. Tighten the spark plugs to specification. See TORQUE SPECIFICATIONS  .
  3. Install the ignition coil housing. See IGNITION COIL HOUSING  .
scientia non olet · About LEMON Manuals