LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 252 (Engine Controls - Removal & Installation) >> Emission Systems & Sub-Systems >> EVAP Canister >> Installation

EVAP Canister: Installation

WARNING: This page is about a different car, the 2003 Pontiac Grand Am and 2003 Oldsmobile Alero. However, it is still accessible from the selected car via links, so may be relevant.
  1. Snap the EVAP canister retainer onto the EVAP canister. See Figure .
  2. Install the end of the EVAP canister into the tab on the body. See Figure .
  3. Install the attaching bolt to the EVAP canister retainer. See Figure . Tighten bolt to specification. See TORQUE SPECIFICATIONS  .
  4. Reconnect the hoses to the EVAP canister. See Figure .
  5. Lower the vehicle.
scientia non olet · About LEMON Manuals