LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 251 (Engine Controls - Removal & Installation) >> Emission Systems & Sub-Systems >> EVAP Canister >> Removal

EVAP Canister: Removal

WARNING: This page is about a different car, the 2003 Pontiac Sunfire and 2003 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.

The Evaporative Emission (EVAP) charcoal canister is located under the vehicle. See Fig 1.

  1. Raise and support vehicle.
  2. Disconnect the hoses from the Evaporative Emissions (EVAP) canister.
  3. Remove the attaching bolt from the EVAP canister retainer. See Fig 2.
  4. Remove the EVAP canister and the retainer. See Fig 3.
  5. Remove the EVAP canister retainer from the canister. See Fig 4.
Fig 1: Removing Charcoal Canister
G00129201Courtesy of GENERAL MOTORS CORP.
Fig 2: Removing Canister Attaching Bolt
G00217347Courtesy of GENERAL MOTORS CORP.
Fig 3: Removing EVAP Canister & Retainer
G00217348Courtesy of GENERAL MOTORS CORP.
Fig 4: Removing Retainer From EVAP Canister
G00217349Courtesy of GENERAL MOTORS CORP.