LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 247 (Automatic Transmission Removal & Installation - (Fwd)) >> Removal & Installation >> Transaxle Mount (Rear) >> Removal

Transaxle Mount (Rear): Removal

WARNING: This page is about a different car, the 2003 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the engine support fixture to support the engine.
  2. Remove the rear mount through bolt. See Figure .
  3. Raise and suitably support the vehicle.
  4. Remove the 3 nuts and one bolt securing the rear mount to the transmission support. See Figure .
  5. Lower the vehicle.
  6. Remove the rear transaxle mount from the vehicle.
scientia non olet · About LEMON Manuals