LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 247 (Automatic Transmission Removal & Installation - (Fwd)) >> Removal & Installation >> Transaxle Mount (Front) >> Removal

Transaxle Mount (Front): Removal

WARNING: This page is about a different car, the 2003 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the engine support fixture.
  2. Raise the vehicle.
  3. Remove the left hand splash shield.
  4. Remove the right hand splash shield.
  5. Remove the 2 bolts from the front transaxle mount.
  6. Remove the front transaxle mount through bolt. See Figure .
  7. Remove the insulator to the mount bracket.
  8. Remove the 2 front transaxle bracket bolts and bracket from the transaxle.
scientia non olet · About LEMON Manuals