LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 243 (Engine Control System - Removal & Installation) >> Sensors & Switches >> Rocker Arm Oil Pressure Switch >> Installation

Rocker Arm Oil Pressure Switch: Installation

WARNING: This page is about a different car, the 2003 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install rocker arm oil pressure switch (2) into the rocker arm oil control solenoid housing (1). Tighten switch to specification. See TORQUE SPECIFICATIONS  . See Figure .
  2. Connect rocker arm oil pressure switch harness connector.
  3. Connect PCV hose (1) and PCV breather hose (2) to the engine. See Figure .
  4. Connect EVAP hoses.
  5. Install engine cover (1). See Figure .
  6. Install engine cover (1) bolts. Tighten bolts to specification. See TORQUE SPECIFICATIONS  . See Figure .
scientia non olet · About LEMON Manuals