LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 243 (Engine Control System - Removal & Installation) >> Sensors & Switches >> Engine Coolant Temperature Sensor >> Installation

Engine Coolant Temperature Sensor: Installation

WARNING: This page is about a different car, the 2003 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install ECT sensor (2) into cylinder head. Tighten ECT sensor to specification. See TORQUE SPECIFICATIONS  .
  2. Connect ECT sensor harness connector (1).
  3. Refill the engine coolant.
scientia non olet · About LEMON Manuals