LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 243 (Engine Control System - Removal & Installation) >> Motors, Relays & Solenoids >> EVAP Canister Purge Valve >> Removal

EVAP Canister Purge Valve: Removal

WARNING: This page is about a different car, the 2003 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect EVAP canister purge valve (2) harness connector (1). See Fig 1 .
  2. Remove EVAP canister purge valve (2) purge hose (3).
  3. Remove EVAP canister purge valve (2) vacuum hose (4).
  4. Remove EVAP canister purge valve from the air cleaner housing.
  5. Inspect EVAP canister purge valve and EVAP purge system for carbon particle contamination before replacing EVAP canister purge valve.
Fig 1: Removing/Installing EVAP Canister Purge Valve
G00180649Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals