LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 241 (Engine Controls - System & Component Testing - 4.8L, 5.3L & 6.0L - Flex Fuel & Gasoline) >> Fuel Systems >> Fuel System Cleaning >> Cleaning Procedures

Cleaning Procedures

WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2003 Hummer H2, 2003 GMC Yukon XL, 2003 GMC Yukon, 2003 GMC Sierra, and 2003 GMC Savana. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the fuel sending unit.
  2. Inspect fuel strainer. Replace sending unit if the strainer is contaminated.
  3. Inspect fuel pump inlet for dirt and debris. Replace sending unit if dirt or debris is found in fuel pump inlet.
  4. Flush fuel tank with hot water.
  5. Pour the water out of the sending unit opening. Rock the tank to be sure that removal of the water from the tank is complete.
  6. Install the fuel sending unit.
scientia non olet · About LEMON Manuals