Powertrain Mount Balance (Lower)
WARNING: This page is about a different car, the 2003 Saturn Vue and 2002 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support the vehicle.
- Loosen the front mount through bolt. See Figure . DO NOT remove.
- Loosen the rear mount through bolt. See Fig 1 . DO NOT remove.
- Shake the powertrain vigorously from front to rear and allow the powertrain to settle.
- Tighten the rear motor mount through bolt. See Fig 1 . Tighten bolt to specification. See TORQUE SPECIFICATIONS .
- Tighten the front motor mount through bolt. See Figure . Tighten bolt to specification. See TORQUE SPECIFICATIONS .
- Lower the vehicle.