Vacuum Brake Booster: Removal
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
- Apply the park brake and block the wheels.
- Remove the brake master cylinder. MASTER CYLINDER .
- Remove the vacuum hose from the brake booster check valve. See Figure.
- Remove the pushrod retaining clip from the brake pedal stud. See Figure.
- Remove the stoplight switch and the pushrod from the brake pedal stud.
- Remove the 4 vacuum booster mounting nuts. See Fig 1.
- Remove the vacuum booster.
- Remove the gasket from the booster and discard.