LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Disc Brakes) >> Removal & Installation >> Hydraulic Brake Booster >> Removal

Hydraulic Brake Booster: Removal

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Apply the park brake and block the wheels.
  2. Disconnect the inlet hose, the steering gear, and the return hoses from the booster assembly.
  3. Remove the master cylinder. See MASTER CYLINDER .
  4. Remove the stoplight switch. See STOPLIGHT SWITCH .
  5. Remove the 4 booster to bulkhead nuts.
  6. Remove the booster assembly.
  7. Remove the gasket. See Fig 1.
Fig 1: Removing & Installing Hydraulic Brake Booster
G00076378Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals