LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Disc Brakes) >> Removal & Installation >> Front Disc Brake Splash Shield >> Installation

Front Disc Brake Splash Shield: Installation

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the splash shield. See Figure or Figure .
  2. Install the hub and bearing assembly. See WHEEL HUB & BEARINGS under REMOVAL & INSTALLATION in appropriate FRONT article in SUSPENSION.
  3. Install the tire and wheel assembly. Tighten to specification. See TORQUE SPECIFICATIONS .
  4. Remove the safety stands.
  5. Lower the vehicle.
scientia non olet · About LEMON Manuals