LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Disc Brakes) >> Removal & Installation >> Brake Rotor >> Removal (Rear - Dual Wheels)

Removal (Rear - Dual Wheels)

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Release the park brake.
  2. Raise and support the vehicle.
  3. Remove the tire and wheel assembly.
  4. Remove the hub and rotor assembly. See HUB & ROTOR ASSEMBLY under REMOVAL & INSTALLATION in appropriate RING GEARS article in DRIVELINE/AXLES.
  5. Mark the relationship of the hub to the rotor. Place the hub and rotor assembly on a hydraulic press. Press the wheel studs out of the hub and rotor assembly.
scientia non olet · About LEMON Manuals