Brake Pipe: Installation
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
- Bend the brake pipe to achieve proper fit.
- Install the brake pipe to the vehicle. Maintain a clearance of 0.75" (19 mm) for all moving or vibrating components.
- Install the brake pipe fasteners to the vehicle.
- Connect the brake pipe fittings.
- Tighten the brake pipe fittings to the BPMV or the wheel jounce hoses to specification. See TORQUE SPECIFICATIONS .
- Tighten the brake pipe fittings to the master cylinder to specification. See TORQUE SPECIFICATIONS .
- Bleed the hydraulic brake system. See BLEEDING BRAKE SYSTEM in appropriate ANTI-LOCK article.