LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Disc Brakes) >> Removal & Installation >> Brake Pedal Assembly >> Removal

Brake Pedal Assembly: Removal

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the pushrod retaining clip. See Fig 1.
  2. Remove the stoplight switch and the pushrod from the brake pedal stud.
  3. Remove the nut from the brake pedal bolt. See Fig 2.
  4. Remove the brake pedal bolt.
  5. Remove the brake pedal.
Fig 1: Removing & Installing Stoplight Switch
G00076380Courtesy of GENERAL MOTORS CORP.
Fig 2: Removing Nut From Brake Pedal Bolt
G00310167Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals