LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Disc Brakes) >> Removal & Installation >> Front Brake Hardware >> Installation

Front Brake Hardware: Installation

WARNING: This page is about a different car, the 2002 Pontiac Grand Prix and 2002 Oldsmobile Intrigue. However, it is still accessible from the selected car via links, so may be relevant.
  1. Lubricate the bores, the inside part of the bolt boot and the caliper pin bolts with GM P/N 18047666, or equivalent.
  2. Press the NEW caliper pin bolt boots into the caliper pin bores.
  3. Install the brake caliper bracket. See FRONT BRAKE CALIPER BRACKET  .
  4. Install the brake pad retainers to the caliper bracket.
  5. Install the brake pads to the caliper bracket.
  6. Remove the heavy mechanics wire and install the brake caliper. See FRONT BRAKE CALIPER  .
scientia non olet · About LEMON Manuals