Function/Appearance Conditions
WARNING: This page is about a different car, the 2003 Buick Regal and 2003 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
If torque converter requires replacement, see REMOVAL & INSTALLATION - CENTURY & REGAL
article.
- If torque converter is discolored/overheated, replace the torque converter.
- If broken/cracked flexplate, replace the torque converter.
- If stripped converter bolt holes, replace the torque converter.
- If torque converter pilot damaged, replace the torque converter.
- If torque converter ballooning, replace the torque converter if end play exceeds .3 INCH (.7 mm) using Converter End Play Checker (J 35138).