LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 214 (Automatic Transaxle Diagnosis - 4T65-E) >> Removal & Installation >> STOPLAMP Switch >> Installation

STOPLAMP Switch: Installation

WARNING: This page is about a different car, the 2003 Buick Regal and 2003 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the stoplamp switch (2) to the brake pedal bracket. See Figure .
  2. Connect the electrical connector to the stoplamp switch.
  3. Install the left side of the I/P insulator.
  4. Adjust the stoplamp switch.
scientia non olet · About LEMON Manuals