Powertrain Control Module: Removal
WARNING: This page is about a different car, the 2003 Buick Regal and 2003 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the negative battery cable.
- Remove the left front inner fender brace.
- Remove the air cleaner intake duct.
- Remove the air cleaner housing cover screws (2). See Figure .
- Remove the air cleaner housing cover (1).
- Without disconnecting the PCM electrical connectors, remove the PCM and the wiring harness from the air cleaner housing assembly (3).
- Disconnect the PCM electrical connectors and remove the PCM.