LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 214 (Automatic Transaxle Diagnosis - 4T65-E) >> Removal & Installation >> Input Shaft Speed Sensor >> Installation

Input Shaft Speed Sensor: Installation

WARNING: This page is about a different car, the 2003 Buick Regal and 2003 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the input speed sensor (440) into the case cover. See Figure .
  2. Install the input speed sensor clip (441) into the case cover.
  3. Connect the input speed sensor electrical connector.
  4. Install the case side cover. See REMOVAL & INSTALLATION in SERVICING - CENTURY & REGAL article.
scientia non olet · About LEMON Manuals