LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 210 (Engine Controls - Theory & Operation - 8.1L) >> Computerized Engine Controls >> Input Devices >> Crankshaft Position Sensor

Crankshaft Position Sensor

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2003 GMC Yukon XL, 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, 2003 Chevrolet Suburban, and 2003 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.

The Crankshaft Position (CKP) sensor signal indicates the crankshaft speed and position. CKP sensor is located on top left rear of engine, near bellhousing. See Fig 1 . The CKP sensor is connected directly to the PCM and consists of a 12-volt reference circuit, low reference circuit and CKP sensor signal circuit. If PCM detects no signal from the CKP sensor for more than 3 seconds, a DTC will set. To diagnose, see SELF-DIAGNOSTICS - 8.1L AVALANCHE, SIERRA, SILVERADO, SUBURBAN & YUKON XL article.

Fig 1: Locating Crankshaft Position Sensor, EGR Valve, Engine Oil Pressure Sensor & MAP Sensor
G00028342Courtesy of GENERAL MOTORS CORP.