LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Analog Instrument Panels) >> Removal & Installation >> Fuel Level Sender >> Installation

Fuel Level Sender: Installation

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2001 GMC Savana Special, 2001 GMC Savana Camper Special, 2001 GMC Savana, 2001 Chevrolet RV Cutaway, and 2001 Chevrolet Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install fuel level sender. Install retaining clip to fuel level sender. Connect electrical connector to fuel level sender. Connect electrical connector retaining clip the fuel level sender. Connect fuel pump electrical connector.
  2. Install fuel sender assembly. Install fuel tank. Refill fuel tank. Install fuel filler cap. Connect negative battery cable. Turn ON the ignition for 2 seconds, turn OFF the ignition for 10 seconds, turn ON the ignition and inspect for leaks.