LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 203 (Automatic Transmission Servicing - (AWD)) >> Lubrication >> Oil Cooler Flushing & Flow Check >> Clean-Up

Oil Cooler Flushing & Flow Check: Clean-Up

WARNING: This page is about a different car, the 2003 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the water supply hose (7) from the and bleed any remaining air pressure from the flusher tank (4).
  2. Remove the fill cap (9) from the and return any unused flushing solution to its container. Rinse the with water. Do not store the transaxle oil cooler and line flusher with flushing solution in it.
  3. After every third use, clean the transaxle oil cooler and line flusher as described in the instructions included with the tool.
  4. Dispose of any waste water/solution and transaxle fluid in accordance with local regulations.
scientia non olet · About LEMON Manuals