LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 2021 (Wiring Systems (General Information)) >> Repair Instructions >> Junction Block Replacement - Accessory Wiring >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2001 Chevrolet Monte Carlo and 2001 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
  1. If necessary install the junction block to the bracket assembly.
  2. Install the circuit breakers (4) and the relays to the junction block as required.
  3. Position the junction block to the I/P carrier.
  4. Install the junction block screws. Tighten the screws to 10 N.m (89 lb in).
  5. Install the left I/P insulator.
  6. Connect the negative battery cable.
scientia non olet · About LEMON Manuals