LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 2021 (Wiring Systems (General Information)) >> Diagnostic Information & Procedures >> Using Fused Jumper Wires

Using Fused Jumper Wires

WARNING: This page is about a different car, the 2001 Chevrolet Monte Carlo and 2001 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.

Tools Required 

J 36169-A  Fused Jumper Wire

Important:  A fused jumper may not protect solid state components from being damaged.

The J 36169-A  includes small clamp connectors that provide adaptation to most connectors without damage. This fused jumper wire is supplied with a 20-A fuse which may not be suitable for some circuits. Do not  use a fuse with a higher rating than the fuse that protects the circuit being tested.

scientia non olet · About LEMON Manuals