LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 2016 (Engine Mechanical - 3.6L (6 Of 6)) >> Repair Instructions - Off Vehicle (4 Of 4) >> Oil Level Indicator and Tube Installation

Oil Level Indicator and Tube Installation

WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install a NEW O-ring on the oil level indicator tube.
    2. Fig 1: Oil Level Indicator And Tube
    GM1866804Courtesy of GENERAL MOTORS CORP.
  2. Install the oil level indicator and tube by sliding the tube down through the lower crankcase hole.
    3. CAUTION: Refer to Fastener Caution .
  3. Install the oil level indicator tube bracket bolt and tighten to 10 N.m (89 lb in).
scientia non olet · About LEMON Manuals